TrolMaster Controllers and Sensors

The Hydro-X system is a professional-grade single-zone environmental controller that is a fully customizable modularly designed system. Installation is simple and the system is easy to expand upon. The Hydro-X system can control most grow light brands (up to 512 lights!), HVAC systems, mini-split air conditioners, commercial dehumidifiers and humidifiers, as well...

TrolMaster revolutionized environmental controller technology when it introduced the Hydro-X. The Hydro-X Pro continues the revolution with a 10’ touch-screen and web-based software. The Hydro-X Pro is backwards compatible with all current Hydro-X control / device modules. It also provides greater flexibility and allows any plug-in module to be addressed...

4-in-1 Sensor for Hydro-X Pro only (MBS-Pro) The MBS-PRO 4-in-1 sensor combines a precision air temperature, humidity, CO2 (PPM) sensor and photocell to create the perfect all-in-one environmental sensor. It is designed for Hydro-X Pro system only.  Assembled using a new water-resistant plastic injected enclosure, the MBS-PRO can be placed...

Full Spectrum Quantum Sensor (MBS-PAR） The Full Spectrum Quantum Sensor (MBS-PAR) provides an accurate and cost-effective measurement of photosynthetically active radiation (PAR) from all light sources used to grow plants. The full-spectrum quantum sensor has a spectral range of 389 to 692 nm ± 5 nm. The improved spectral response...

CO2 Sensor for Hydro-X only (MBS-S8) The optional CO2 Sensor (MBS-S8) measures the CO2 PPM within the growing area. Using the MBS-S8 allows the users to connect and control their supplemental CO2 system using the Hydro-X. *Used in combination with one or more DSC-1 CO2 device modules. Comes with: 1...

Smoke Detector (MBS-SD） The optional Smoke Detector (MBS-SD) can alert the user to smoke within their growing area at ALL TIMES. Up to 5 smoke detectors can be connected to a single Hydro-x controller. If ANY of the smoke detectors determine there is smoke in the area, the user will...

3-in-1 Sensor for Hydro-X only (MBS-TH） 3-in-1 Temp/Humid/Light sensor for the Hydro-X system. Note: This is a replacement or spare part. The main controller comes with a sensor already. Sensors should remain dry and clean to prevent premature failure. Do not spray foreign substances or allow water / condensate on the...

Water Detector 2 (WD-2） The optional Water Detector WD-2  allows the user to detect water leaks or water on the floor of the facility. Simply place the water sensor at floor level (or wherever you want to watch out for water leaks). Up to 5 Water detectors can be connected...

This adapter is used to control ThinkGrow LED fixtures TrolMaster’s Hydro-x system can control most of the supplemental lighting fixtures sold today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols....

This adapter is used to control LED fixtures with 0-10 a dimming protocol. TrolMaster’s Hydro-X system can control most of the horticultural lighting fixtures sold on the market today. Most light manufacturers provide the ability to control their lighting systems using what is known as a low-volt control. That low-volt...

Lighting Control Adapter D (LMA-12） TrolMaster’s Hydro-X system can control most of the horticultural lighting fixtures sold on the market today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster...

Lighting Control Adapter S (LMA-13） TrolMaster’s Hydro-X system can control most of the horticultural lighting fixtures sold on the market today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster...

Lighting Control Adapter P (LMA-11） TrolMaster’s Hydro-X system can control most of the horticultural lighting fixtures sold on the market today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster...

Lighting Control Adapter DLI (LMA-15） TrolMaster’s Hydro-X system can control most of the horticultural lighting fixtures sold on the market today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster...

Lantern Schedule Adapter (LMA-24） TrolMaster’s Hydro-X system can control most of the horticultural lighting fixtures sold on the market today. Most light manufacturers provide the ability to control their lighting systems using what known as a low-volt control. That low-volt control can take many forms and communication protocols. TrolMaster makes...

Thermostat Station (TS-1） The TS-1 thermostat station is designed to replace a thermostat connected to a conventional cool-only HVAC unit. The TS-1 is wired to the HVAC system using the same low-voltage thermostat cable, and has the standard color-coded wiring as most thermostats. The Hydro-x allows separate Day and Night...

Thermostat Station 2 (TS-2） The TS-2 thermostat stations is designed to replace a thermostat connected to a standard HVAC unit. The TS-2 can be used to control most HVAC systems including heat pump and multi-stage HVAC systems. The  TS-2 is wired to the HVAC system using the same low-voltage thermostat cable, and...

AC Remote Station (ARS-1) The ARS-1 mini-split air conditioner controller is a unique product that solves the age-old problem of having separate day and night temperature settings on your mini-split air conditioners. The ARS-1 is a universal controller that works with most mini-split air conditioners (and some window-type AC units...

Temperature Device Station (DST-1） The TrolMaster DST-1 Temperature control modules allow the user to easily connect and control standard heating or cooling devices to the Hydro-x. Any heating or cooling device that is 10-amps at 120 volts or less can be controlled by the DST-1. Features LED Power Indicator RJ12...

240V Temperature Device Station (DST-2） The TrolMaster DST-2 Temperature control modules allow the user to easily connect and control standard heating or cooling devices to the Hydro-x. Any heating or cooling device that is 10-amps @ 240 volts or less can be controlled by the DST-2. Features LED Power Indicator...

Humidity Device Station (DSH-1） The TrolMaster DSH-1 Humidity control / device modules allow the user to easily connect and control standard humidifying or dehumidifying devices to the Hydro-x. The DSH modules are rated at 10-amps. *Use with dehumidifiers less than 7 amps to avoid current overload. Features LED Power Indicator...

Humidistat Station (HS-1） The HS-1 from TrolMaster is used to control commercial dehumidifiers. Most larger / commercial dehumidifiers have a “low-volt” control option so the dehumidifier can be controlled by an external humidistat. The HS-1 works and is wired exactly like an external humidistat. The HS-1 is the best way...

CO2 Device Station (DSC-1) The TrolMaster DSC-1 CO2 control / device module allows the user to easily connect and control standard supplemental CO2 devices or CO2 exhaust controls to the Hydro-x. Any CO2 device that is 10-amps @ 120 volts or less can be controlled by the DSC-1. Features LED...

Program Device Station (DSP-1) The TrolMaster DSP-1 program device module (timer module) works like a multi-function timer. The DSP-1 allows the user to easily connect any device that needs to be controlled by TIME to the Hydro-x.  Any device that is 10-amps at 120 volts or less can be controlled...

Dry Contact Station (DSD-1） The Trolmaster DSD-1 Dry-contact module provides a simple and flexible solution to those who want to connect & control devices to the Hydro-X using a “dry-contact” or relay to activate the device. Some equipment requires either normally open or normally closed contact closure in order to...

Expander Station 4 (4RS-1） The 4RS-1 is a universal 4-outlet power expansion module. It can be used with any of TrolMaster’s “plug-in” style device modules to expand the number of devices that can be controlled by the Hydro-x. A single 120-240 volt “trigger” cable on the 4RS-1 connects to your...

Dual Condition Adaptor (DCC-1） The TrolMaster DCC-1 provides a simple solution to control a single device, with more than one condition. For example, people like to turn on their exhaust fans when either temp or humidity is too high; shut off CO2 when turn on exhaust fans. There are many...

Temperature / Humidity Station (TSH-1）  The Trolmaster TSH-1 Temperature / Humidity Station is a 0-10 volt analog output control station that works with the HCS-1 and HCS-2 controllers. The TSH-1 can be configured to control either a temperature or a humidity device that requires a variable 0-10 volt input signal....

Low-Volt Station (DSV-1） The Trolmaster DSV-1 is a low-voltage output module that can be used on the HCS-1, HCS-2 controllers. The DSV-1 can be addressed to be used as a temperature, humidity, CO2, or timer device module. Multiple voltage outputs are selectable by the user. The DSV-1 can output either...

RJ12 Extension Cable Set (ECS-1） TrolMaster modules and sensors all come complete with an RJ12 16ft cable, Y-splitter and RJ12 4 ft cable to connect to the Hydro-x. When connecting modules that are farther apart, you can use the Extension cable set ECS-1. The ECS-1 comes complete with another 16ft...

RJ12 to 3.5 Jack Extension Cable Set (ECS-2) The ECS-2 cable set is designed to connect Hydro-X to most LED drivers with a pigtail 0-10v wiring. The ECS-2 comes with a 16 ft RJ12 cable, a Y-splitter and a special 4 ft RJ12 / 3.5mm jack cable. The special cable...

RJ12 to Threaded Waterproof Connector converter cable (ECS-3） The ECS-3 provides a 5/8” diameter connector for some of Fluence brands LED fixtures using Threaded Waterproof  Connectors for interconnecting. Like the other ECS kits, the ECS-3 comes with a 16ft RJ12 cable, a T-splitter and a special 4 ft RJ12 /...

RJ12 to PushLock Waterproof Connector converter cable (ECS-5） The ECS-5 provides a 5/8” diameter connector for some of Fluence brands newer LED fixtures using PushLock Waterproof Connectors for interconnecting. Like the other ECS kits, the ECS-5 comes with a 16ft RJ12 cable, a T-splitter and a special 4 ft RJ12...

RJ12 Splitter Hub (SPH-1) The SPH-1 Splitter Hub from TrolMaster makes installation of our controllers as easy as plugging in a phone cable. The SPH-1 hub uses a single RJ12 cable input jack, and provides (8) individual RJ12 output jacks that can be connected to various TrolMaster sensors, adapters and...

Weatherproof Box (BM-1） The BM-1 weatherproof box is designed for the protection for TrolMaster TS-1/2, HS-1 and ARS-1 controllers from dripping water and low-pressure sprayed water.    What TrolMaster does Automation Control Data Collection Monitoring Optimization Remote Access TrolMaster's platform offers Smart connectivity Remote accessibility Flexibility Modularity Upgradability    What's in the box...

500ft RJ12 Cable Roll (ECS-500） Most sensors and control modules are connected by using standard RJ12 cable and splitters, making installation as simple as plug-and-play. TrolMaster provides the ECS-500 cable roll package for users to customize their own cables when the standard cables provided are not satisfied their need. Features...